Many people think it is hard to set Paksat 38.0E dish setting but infect this is not a difficult job if someone read this article properly.
 |
| Paksat Dish Setting |
Paksat 38.0E Dish Setting Introduction
Paksat 38E is a
Pakistani satellite through align this satellite user can watch almost all
famous Pakistani tv channels through any good satellite dish receiver. Only few
Pakistani channels are left in Asia sat 105.5E. All Other tv channels are
shifted on Paksat. Many people think it is hard to set Paksat 38.0E dish
setting but infect this is not a difficult job if someone read this article
properly then he can easily align paksat 38.0E to his dish antenna. Today I
will tell you how you can set Paksat 38.0E Dish Setting. Before to start
this tutorial please note that this information is testified by professional
dish finders.
Things To Need Before Paskat 38.0E Dish Setting
Before to align dish antenna to Paksat 38.0E you need to some
material. Here I will tell you what material you require before Paksat
38.0E Dish Setting.
1- First you need a HD satellite receiver that will you buy from
market between Rs 1600-2000
2- Second you need a Dish antenna which size is from 4Feet to
8feet. Minimum you require 4Feet Dish antenna. If you use 6freet or 8feet dish antenna,
then you can access all channels of Paksat 38E. But the result of 4Feet is not
bad you can access nearly 150 tv channels.
3- Third thing you need a C-band lnb that is most important item
for Pakstat 38.0E dish setting.
4- If you want to access to more satellite with single dish
antenna, then you will need a Diseqc switch
to toggle between two or more satellite receiver.
5-
Last you need a Coaxial cable with caps to fix with
receiver and lnb.
How To Align Dish Antenna To Paksat 38.0E
First of all, attach you tv box to your Tv Set and attach coaxial cable to receiver and other side with your C-band lnb. After that ON your receiver and television press menu from your receiver’s remote and got antenna setting here you will select satellite list form this list chose Paksat 38.0E for dish setting. Press info button and in next menu chose 5150 form lnb frequency list now add press exit button and go back to satellite page after that press again exit but to move out from this page. Now in previous page go trasponder pand and here select paksat 38E and add strong frequency of Kohenoor News that is3972-H-6500.
Asiasat 3s is search on 105.5 degree
east between south and east, Paksat is searched on 38.0 East between South and West.
So you should move dish antenna form south to west. Skew you lnb to 44 degrees
and start to move dish antenna with zig zag movement from South to East. After
some movement you can see your single line show signal. Here you stop and move
your lnb to increase your signal and fix dish antenna height with screw that
was inserted in its foot.
Now go to again satellite page
select Paksat 38e and press search button that was indicate by color from
bottom of this menu. Select blind from this menu set network searching ON and
press start button. Channel will be start to scan you will wait to complete the
scanning on number of 100. After complete now can see your channel list will be
created so press ok button to save this list.
COMMENTS