First you will need to a computer or laptop with rs232 port and rs232 cable. In many computers there is no Rs232 port because all new computer.
![]() |
How To Use RS232 Cable |
How To
Install software with Rs232 Cable?
Satellite receivers are used to watch tv
channels through satellite. Trough satellite receiver user can access many
satellite sites and watch tv channels of any country. Just attach receiver to
dish antenna with lnb and search your desire country’s satellite. There are
many companies those are made Satellite receiver like starsat, echolink, tiger
and neosat.
Receiver companies are sending receiver’s
software update continually. In some receiver these software updates are
download and install through internet or user can download update from internet
and save files in usb flash driver then attached this usb to satellite receiver
and select update with usb updates are being start to install. But in few case
you need to Rs232 to update satellite receiver software because sometime receiver
does not support updating through flash drive or some time receiver does not
start due to corrupt usb files. In these cases, you will take your satellite
receiver to repairing shop but if you update satellite receiver software itself
by rs232 you can save fee of shop keeper. Today I will share with you how you
can update satellite receiver software with Rs232.
First you will need to a computer or laptop
with rs232 port and rs232 cable. In many computers there is no RS232 port because
all new computer and laptop this rs232 port is removed. In this case you have
to buy a usb to rs232 converter. Now connect rs232 port to back side of
receiver and attached second side of cable to your computer ‘s usb port or
rs232 port. After attaching receiver to computer window ask you download driver
for rs232 cable. Install these drivers through internet after installation now
you need a updated software for your receiver for this you will have to read
your receiver’s software version and search on internet new updated firmware
this is not a difficult job you can easily search and download new update for
your satellite receiver from internet. You can also check Here latest satellite receiver’s software.
Finally, now you have to download
firmware changer software. If you have 1506g or 1506t receiver for this sunplus
loader is used. Download this sunplus loader from This Link after download open sunplus loader here is some setting is
required just fallow these step
1-
Off your satellite
receiver from the back button of receiver.
2-
Select UarIsp from
top menu of sunplus load
3-
Press select rom
button and chose software file from your folder
4-
Chose DDR2 from DDR
type.
5-
Now click start
button
6-
After start of procedure
now ON your receiver from back button
Software installation will be started after
installation receiver will be reboot. Attach your receiver to your television.
Now you can use latest features through newly updated software. Note this
sunplus load is only use for 1506 receivers if you have gx receiver model then
you will to download Gx loeader. One thing is more during installation of
software don’t plug out your receiver because if receiver is disconnected to
electricity during installation then your receiver will be dead.
COMMENTS