today I am going to tell you how you can play two TV with one setup box. Let’s take your satellite receiver in your hand. See in the back side, there
Watch Two Tv With One Receiver
Hi
friends today I am going to tell you how you can play two TV with one satellite receiver. Let’s take your satellite receiver in your hand. See in the back side,
there are few ports the yellow port is a video port ND remaining red and white
ports, are audio ports. As you can see, you will need a connector for playing two
TV with one satellite receiver. if you'll go to the market for purchasing this
connector. You can purchase it by taking the name 1
male to two female RCA splitter. Friends you have to connect this connector in
the video port of your setup box. So in this way the video port of my setup box
will get split into two parts connector will a little loose and you can make it
tight by pressing a little bit.
After
this you have to connect the video cable of my first TV in first port and the
video cable of twond TV in second port. And also you can connect the single
audio port of both the TV first and second port. You can connect the audio
cable of first TV in first port of switch and you can connect audio cable of
second in second port of connector. As you can see that you have this cables
which is coming from your first TV the first yellow cable is video port of your
first TV and the two remaining red and white cables are audio cables of your
first TV. Because you have only one audio port in the setup box right now
therefore you are going to use only single audio cable of your first TV Let's
connect this and connect this cable in video port Similarly.
You
have another pair of cables coming from your second TV and you will leave one
audio cable and will connect one video cable and other audio cable on to the
setup box. Connects video cable in the video port and audio cable on to the
audio port.
Now
let's switch on the set up box and check whether both the TVS are running or
not. you have given power to the setup box. Let's see the setup box gets ON or
not. As you can see this setup let you show you also, box is switch ON now. And
now, you are going to show your TV. See your first TV is Running and you can see
that second TV also running you can see. If you change the channel, actions are
reflecting on both the TV’s.
Friends
this is the best technique if you want to play two TV with single satellite
receiver. This technique has a problem also and if I'll talk about the problem it's
having a only one problem and that is you will have to see same channels on
both the TV’s at once. If you want to fix this issue, then you will need single
solution lnb which have two output for two receivers.
COMMENTS